Verified customer reviews
733 reviews
109 reviews
WandaM
Product didn’t work perfectly, but it did make the rock dings in my truck’s hood leading edge less evident. Application was easy. It came with minimal instructions, so review of their product on their YouTube channel should be done prior to use. Entire application timeframe was less than 30 minutes for the two rock dings.
Katie
This product works pretty well. I have many scratches on my vehicle due to my younger kids learning to ride their bike in the last few years. Dealership paint jobs to fix them all would cost a fortune. So i decided to give this a try and was pretty impressed. I did need to use a bit of paint thinner because i applied the first layer a bit to thick, after a few rub downs with the thinner it came out pretty decent. Scratches i worked on after went much more smoother. I would give this product another go with another vehicle in the future. Shipping came earlier than was expected as well.
Jeffery Wilson
Color does not match for my application
Howard
The package was partially crushed. The box appeared to have been opened - silver seal between the box and its lid was not in place- prior to delivery. Otherwise it all seems to Beas promised.
S. Rivas
This color is 070 and was used on a Toyota CHR. The box came with two different paints. One was a plain white that was just to dark. The pearl shine did zero to nothing. It looks like I used white out. Overall standing 5 feet away it looks amazing compared to how it was. Not happy but it will do.
Gary B
I'm a professional detailer. Color match was a 7/10. The finishing product didn't work as described. Had to wet sand and buff. I would buy it again.
Tanya N
Didn't work for me. Company took care of it.
andrew roman
So I've used this product for about 2 years now, and I have had great luck with it! If applied correctly the finished product is amazing! Here are two customer vehicles that I did, both on black paint to really show you what it is capable of! Also follow these steps 1. Wash vehicle with a wax stripper 2. Before drying spray iron remover on vehicle 3. Spray iron remover off 4. Use foam cannon with non wax soap & clay bar 5. Dry vehicle & blow crevices with whatever you have 6. Put vehicle in a shaded area 7. Paint correct vehicle (too much on this look up how to) 8. Apply ceramic coat using directions 9. Do not let vehicle get exposed to any road conditions or sunlight/ water for 24-48 hours 10. Do not wash or wet vehicle for a week!
Dany_1983
Veramente un ottimo prodotto, lo usato oggi sulla mia auto, è uno specchio, lha lucidata una meraviglia. Lo consiglio vivamente.
Bob
Play Video Came very nicely packaged. Easy step by step instructions. Results were top notch. Did 1/2 the car first to compare and could really see an incredible difference. Great satisfaction.
Wendy White
This product is awesome. We have had our Ford Edge for 2 weeks and wanted to protect the paint. It was detailed 2 days ago and had detailed apply the 9 H. As you can see in pic it turned out great. We are real happy with the product. Differently recommend.
Jean Poulin
Used on my Tesla Model Y. Good result. Enough ceramic for 2 coats. The pre-treatment though we have just enough. To help spred the ceramic with second quote I sprayed very little distilled water. They should give more micro-fiber and I recommend to wash the microfiber first. By the way after the washing the car, if you do not have a clay to remove last contaminant you can at least use distiled water that you let it damp to suck any materials for few minutes before wiping with very clean microfiber. For Model Y do not forget to do the black plastic trim around wheels as they suck the dirst easily by nature, putting ceramic make them a lot more dirt repellent.
Jon
Easy to apply, smooth with water spray and polish off. Results are fantastic so far. Preparation is everything.
JH1234
Play Video I usually don’t write reviews but I had to with this product. It’s awesome. Excuse my messy garage but you can definitely see the results of using this product. It took about three hours for me to apply and do a second coat. I was super cautious as my Camaro is my unofficial baby. The product worked just as advertised and I couldn’t be more pleased. I use a air blaster to dry my car to avoid any scratches. As for durability I have had it on my car for around 5 months now and it looks just as great as the moment I put it on my car. I would recommend this product in a heart beat.
Amazon Customer
Just finished applying this to my Dodge Ram. It was suprisingly easy to apply and so far I'm very excited about it! Heres a few pointers I picked up- -The 50ml was more than enough for my 4 door truck. Be generous with your drops and dont be afraid to "load up" the sponge to start off. The instructions say 7-10 drops for a 60cm square, so if you do a bigger area than that use more drops. -This product is safe on chrome and black plastic trim. It had no effect on the chrome at all and just wiped away. It does make the plastic door handles on my truck extra dark black, so I quickly wiped them off with a wet towel. -the spray bottle for the pre-treatment sucks. I transfered the liquid to a different bottle halfway through and wish I would have done that at the start! Dont go crazy with this stuff, just a fine layer is enough and you'll run out of this faster than the ceramic liquid. -if you can do this indoors... Do it! Bugs love the pre-treat spray as it smells sweet. Also indoors is temp controlled. The hotter it is the faster these things evaporate and it makes it tougher to properly apply/wipe away. -watch the companies youtube video on how to apply... Good luck!
Jonathan R Franson
Play Video This stuff was awesome. I am more than happy with how it looks and feels. But this is not normal wax, so DO NOT TREAT IT LIKE NORMAL WAX. First, this is is going to amplify clear coat imperfections like scratches and swirls, so doing all the prep work you can to get the best starting point is really going to make the biggest difference. This product isn't so much for hiding stuff, its for protecting and keeping the surface. Though it is pretty neat what it does to plastic. Completely change how you apply this stuff. First off, you really need good lighting and LOTS! of clean lint free cloths. Apply the pre-spray and wipe that around with a sponge. Then put some of the coating on the applicator. Only do this in the stated 2'x2' area. Wipe the applicator back and forth lightly over the surface. Remember, this is a "NANO" coating, not a thick wax coating. It takes very little. DO NOT wait for this to "set up" like normal wax. As soon as you have worked the wax into the surface, start to lightly remove it. Use a clean cloth each time. Fold the cloth so you only have a 3 or 4" by 6" rectangle. You don't need a big area. Lightly remove the extra coating from the surface. Once it looks clear, flip it over and sure the other (clean) side to lightly feather out the edges. Lighting is key, especially if you have a dark car. If you have any extra on the surface it will make sort of a streak or patch, that kind of looks like oil or a hand print on the surface. THIS WILL NOT COME OFF without either stripping it or doing a ton of work to polish it back down. So make sure you are very diligent to remove the extra. I suggest only doing a portion of the car at a time. Once that is done, move it out into the sun and let it cure for a while. Then either give it another coat, or move onto a new section. This stuff feels like glass. I am extremely impressed with it, but you have to take the right steps or you will end up with a pain to correct.
Dusty
Durability and shelf life: 5 Stars! I bought this product in 2018 and I forgot I had it on the shelf and now it is 2020 July . The Chinese copy Mr.Fix crystallized like a rock and I did not open it. Just make sure it is in a cool place to store for the future coats and lid tight closed. Price : Slightly on the pricey side. But it is the top of the best ceramic coating I have used and easy to use. From 2018 -2020 it last on my truck hood for more than a year with 2- 4 coats. I suggest to be patient with all ceramic coating. I had haze from not wiping It in time and put too much drops on the pad . It will buff out with light- high cut compound and then light cut mirror polish compound Meguiar. Simply follow the box directions .... pretty simple. Would buy again , but i still have half of bottle!
Amazon Customer
First wash two weeks after applying, rinsed, sprayed with a foam cannon, rinsed off and dried. Super easy, and looks amazing.
Avi Nash
I'm a DIYer on car detailing. Used on 5 different BMWs over the last 3 years. Did the simplest thing...wash, clay, apply, and remove. Claying is the hardest step. Lasted 2 years on my silver X5, lasted 2 years on my white convertible. Just applied to my yellow M4 and to my alpine white X5. Its well worth it and I recommend this over waxing. I used to do paint cleaner, polish, wax, spending thousands a year on products. This is the be-all-end-all and I will not use another product. Tip: the front bumper, hood, and side mirrors are exposed to the brunt of the road debris and bugs. Clay these yearly and re-apply to these areas alone as a touch up.
Amazon Customer
Play Video As a professional detailer this product was extremely easy to apply and I must say the finish on the vehicle looked absolutely amazing I'm not sure what the durability or the lifespan will be like but so far very impressed
